 |
Pilot Valves and Enclosures
|
| Tyco Environmental Systems manufacture and distribute a range of Pilot Valves and Enclosures, this range includes:
ATEX Approvals:
For further information on any of the products, please select the link provided, alternatively contact us directly.
|
|
Flying leads, QF
Screws/spade
terminals, QT2
DIN 43650A
connection, QR
Conduit entry
connection, QD
|
Q Series Solenoid
Solenoid used in remote or integral actuation of dust collector diaphragm or pilot valves.
Suitable for
All integrally piloted Goyen dust collector diaphragm valves, RCA3D series pilot valves and pilot valve enclosures, and 3DS pilot valves.
Installation:
Slide solenoid over ferrule tube. Ensure terminals are on top. For QT and QF type solenoids ensure nylon washer is in place. Slide clip onto pilot iron top. Ensure voltage supplied to solenoid is within -10% and +15% of the solenoid rated voltage.
Construction:
Encapsulation: PA-6
C-frame: Mild steel zinc passivated
Bobbin: PA-6
Insulation class: B/130 deg C
Rating: Non-continuous use only
Clip: Mild steel (mechanically plated)
|
| 
RCA3D with flying
lead connection
RCA3D with conduit
entry connection
RCA3D with spade
connections
RCA3D with DIN43650A
connection
|
RCA3D Remote Pilot
Remote Pilot solenoid valve to control the actuation of dust collector diaphragm valves.
Suitable for
All Goyen dust collector diaphragm valves
Installation
Prepare pilot mounting hole in panel to Ø19.3/19.4 (Ø0.760"). Panel thickness must exceed 1.5mm (0.062"). Ensure o-ring is in place before tightening locknut. Preferably, install pilot valves with solenoid on top. For reliable operation, ensure supply voltage is within -10% and +15% of rated solenoid voltage. Replace components within 1 million cycles.
Construction
Body: Aluminium
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile
Locknut: Mild steel zinc passivated
Screws: 302 SS
Clip: Mild steel (plated)
|
|
|
MIP Pilot Valve
Pilot valve with integral silencer and dust shroud to mount directly to 3 Series dust collector diaphragm valve.
Suitable for
RCAC20T3, RCAC20ST3, RCAC20DD3, RCAC20FS3, RCAC25T3, RCAC25DD3, RCAC25FS3 dust collector valves only.
Installation:
Ensure o-ring is in place on diaphragm valve cover. Gripping the shroud, hand tighten MIP pilot valve onto cover od diaphragm valve. Solenoid is free to ratate on pilot valve. MIP thread will suit 1/8 BSP T, 1/8 BSP P and 1/8 NPT ports.
Construction:
Body: Aluminium (dicast)
Armature: 430F SS
Encapsulation: PA-6
Insulation: Class H/180 deg C
Seals: Nitrile
Shroud: PA-6
|
| 
3DS-0
3DS-300 to 3DS-306
3DS-310 to 3DS-324
|
3DS Pilot Valve
Pilot valve with integral silencer and dust shroud to mount directly to dust collector diaphragm valve.
Suitable for
RCAC20T3, RCAC20ST3, RCAC20DD3, RCAC20FS3, RCAC25T3, RCAC25DD3, RCAC25FS3 dust collector valves only.
Installation:
Ensure o-ring is in place on diaphragm valve cover. Gripping the shroud, hand tighten 3DS pilot valve onto cover od diaphragm valve. For reliable operation ensure supply voltage is within -10% and +15% of rated solenoid voltage. Solenoid is free to ratate on pilot valve. 3DS thread will suit 1/8 BSP T, 1/8 BSP P and 1/8 NPT ports. Replace pilot components within 1 million cycles.
Construction:
Body: Al 2011-T3
Armature: 430FR SS
Ferrule: 302 SS
Encapsulation: PA-6
Insulation: Class B/130 deg C
Seals: Nitrile
Shroud: PA-6 |
| 
3-5V Enclosure
3-8V Enclosure
3-12V Enclosure
|
NEMA4/Raintight/ATEX II 3 D G Diecast Pilot Valve Enclosures (5, 8, 12 valve)
Diecast aluminium enclosures for Goyen RCA3D pilot valves, available optionally with anti-condensation heater.
Suitable for
ATEX Category 3 D & G, and all other non-hazardous applications, for piloting Goyen diaphragm valves.
Installation
Ensure devise is disconnected from power before opening the enclosure. These enclosures are all finished with the common solenoid terminals pre-wired.
For reliable operation, ensure supply voltage is within -10% and +15% of rated solenoid voltage.
To guarantee NEMA4 performance ensure gasket is in place when attaching lid to enclosure base.
Replace components within 1 million cycles.
Construction
Body: Al 2011-T3
Pilot Body: Al 2011-T3
Ferrule: 302 SS
Armature: 430FR SS
Seals: Nitrile
Screws: 302 SS
Clip: Mild Steel (plated)
Pilot Valve Thread Type: PA-6
Conduit Entry Thread Type: PA-6
|
|
Dust proof enclosure
Flame proof enclosure
|
NEMA7, NEMA9, ATEX II 2 D & G Diecast Pilot Valve Enclosures for Hazardous Locations (6 Valve)
Diecast aluminium enclosures for Goyen RCA3D pilot valves suitable for use in dust ignition proof and flameproof applications.
These systems are supplied fully assembled from the factory and apart from electrical connections, must not be modified. Such modification will void the hazardous rating of these enclosures.
Construction
Body: Al 2011-T3
Pilot Body: Al 2011-T3
Ferrule: 302 SS
Armature: 430FR SS
Seals: Nitrile
Screws: 302 SS
Clip: Mild Steel (plated)
Pilot Valve Thread Type: PA-6
Conduit Entry Thread Type: PA-6
|
|
|
